Brake hose front axle left and right – Mercedes R107 R129 W123 W124 W126 W201 etc.

Brake hose for the front axle, suitable for mounting on both the left and right sides of various classic and youngtimer Mercedes models.

This brake hose offers good quality for an affordable price and is therefore a good choice for maintenance and replacement of outdated brake hoses.

Suitable for Mercedes models

R107 – from MOPF 09-1985

• 300 SL – 107.041 – M103.982 – 09-1985 to 08-1989
• 420 SL – 107.047 – M116.964 – 09-1985 to 08-1989
• 500 SL – 107.046 – M117.964 – 09-1985 to 08-1989
• 560 SL – 107.048 – M117.967 – 09-1985 to 08-1989

R129

• 300 SL – 129.060 – M103.984 – 03-1989 to 08-1993
• 300 SL-24 – 129.061 – M104.981 – 03-1989 to 07-1993 – up to chassis number F125157, excluding code 806 – from F125158 only with code 805
• 500 SL – 129.066 – M119.960 and M119.972 – 09-1989 to 08-1992

W123

• 200 – 123.020 – from chassis number 126116
• 230 – 123.023 – from chassis number 158336
• 250 – 123.026 – from chassis number 079229
• 280 – 123.030 – from chassis number 027814
• 280 E – 123.033 – from chassis number 064177
• 200 D – 123.120 – from chassis number 179866
• 240 D – 123.123 – from chassis number 150315
• 300 D – 123.130 – from chassis number 165148

C123

• 230 C – 123.043 – from chassis number 015331
• 230 CE – 123,243
• 280 C – 123.050 – from chassis number 003417
• 280 CE – 123.053 – from chassis number 017059

S123

• 200 T – 123,280
• 230 T – 123,083 – from chassis number 004327
• 230 TE – 123,283
• 250 T – 123,086 – from chassis number 003286
• 280 TE – 123,093 – from chassis number 004196
• 240 TD – 123,183 – from chassis number 007371
• 300 TD – 123,190 – from chassis number 011093

W124

• 200 – 200 E – 220 E – 230 E – 260 E – 280 E – 300 E – 320 E – 400 E – 500 E
• 200 D – 250 D – 300 D and various turbodiesel versions

C124

• 200 CE – 220 CE – 230 CE – 300 CE – 300 CE-24

S124

• 200 T – 200 TE – 220 TE – 230 TE – 300 TE
• 200 TD – 250 TD – 300 TD and various turbodiesel versions

W126

• 260 SE
• 280 S
• 280 SE – 280 SEL
• 300 SE – 300 SEL
• 380 SE – 380 SEL
• 420 SE – 420 SEL
• 500 SE – 500 SEL
• 560 SE – 560 SEL

C126

• 380 SEC
• 420 SEC
• 500 SEC
• 560 SEC

W201

• 190 E 1.8
• 190 2.0
• 190 E 2.0
• 190 E 2.3
• 190 E 2.3-16
• 190 E 2.5-16
• 190 E 2.5-16 Evolution
• 190 E 2.5-16 Evolution II
• 190 E 2.6
• 190 D 2.0
• 190 D 2.5
• 190 D 2.5 Turbo

Additional information

1. Part: brake hose
2. Installation location: front axle
3. Mounting side: left and right
4. Total length including thread: 370 mm
5. Total length excluding thread: 355 mm
6. Flexible brake hose length: 292 mm
7. Connection 1: M10 x 1 – wrench size 14 mm
8. Connection 2: M10 x 1 – wrench size 17 mm
9. Mercedes OEM number: 1294280035
10. Also listed as: A1294280035
11. Similar Mercedes OEM number: 1234280635
12. Also listed as: A1234280635

Brake hose replacement advice

For classic and modern classic cars, we recommend replacing brake hoses preventively every 8 to 10 years, even if few kilometers are driven. This is because brake hoses age not only through use but also over time. For modern, more heavily used cars, a replacement interval of approximately 50,000 kilometers or at most 5 years is often maintained.

NB

For some versions, the correct brake hose depends on chassis number and vehicle code. This applies in particular to the R129 and certain W123 versions. For these models, check the chassis number and the Mercedes OEM number before ordering.

Always check before purchase and installation whether the part is suitable and equivalent based on photos, description, and specifications; installed or used parts cannot be returned.