Engine oil cooling hose M110- Mercedes R107 C107 280 SL 280 SLC

Description

Engine oil cooling hose – Mercedes R107 C107 280 SL 280 SLC – M110 engine

These cooling hoses are known for the rubber becoming hard and brittle due to aging, and eventually tearing. This can cause engine oil to leak. In the event of severe damage, a large amount of engine oil can be lost in a short time, with the risk of serious engine damage.

These cooling hoses have been around for many years hardly or no longer available. That is why we have them have reproduced based on an original copy in the highest possible quality, with close attention to the proper fit, material selection, and reliable operation.

Suitable for Mercedes models

R107

• 280 SL – M110 engine

C107

• 280 SLC – M110 engine

Suitable for Mercedes engines

• M110.922
• M110.932
• M110.985
• M110.986
• M110.990

Starting from engine number

M110.922

• Engine versions 10-50 and 20-60 – from engine number 024636
• Engine versions 12-52 and 22-62 – from engine number 041886

M110.932

• Engine versions 10-50 and 20-60 – from engine number 004482
• Engine versions 12-52 and 22-62 – from engine number 000854

Specifications

1. Part: engine oil cooling hose
2. Application: engine oil cooling
3. Length: approximately 64 cm
4. Reproduction based on the original.
5. Execution: high-quality reproduction

Additional information

1. Replaces the old engine oil cooling hose, the rubber of which can harden and become brittle due to age.
2. A torn or porous hose can cause engine oil leakage and loss of engine oil.
3. In the event of severe oil loss, there is a risk of engine damage.
4. When replacing, also check the other engine oil cooling hoses and connections for aging, cracks, and leakage.
5. After installation, carefully check the engine oil level and all connections for leaks.
6. Check the hoses for leaks again after the first ride.

Always check before purchase and installation whether the part is suitable and equivalent based on photos, description, and specifications; installed or used parts cannot be returned.