Right intake manifold gasket – M116 M117 – Mercedes R107 C107 W126 C126 W463

Description

Right intake manifold gasket – M116 M117 engine – Mercedes R107 C107 W126 C126 W463

Elring quality version – recommended by Stolk Balkbrug due to its very high quality, precise fit, and durable seal.

Intake manifold gasket for the right side of the Mercedes M116 and M117 V8 petrol engines.

On the right is the passenger side, viewed in the direction of travel of the car. This applies to both European and American left-hand drive Mercedes models.

This gasket ensures a good seal between the intake manifold and the cylinder head. Due to aging and temperature fluctuations, the seal can start to leak, causing the engine to draw in false air and run irregularly.

Left intake manifold gasket > MB-1171412480-MOT-NB-L

Suitable for Mercedes models

R107 – SL

• 380 SL – 1980-1985 – 107.045 – M116.960, M116.962 – Note the engine number for M116.960
• 420 SL – 1986-1989 – 107.047 – M116.964
• 500 SL – 1980-1985 – 107.046 – M117.960, M117.962 – Note the engine number for M117.960
• 500 SL – 1986-1989 – 107.046 – M117.964
• 560 SL – 1985-1989 – 107,048 – M117,967

C107 – SLC

• 380 SLC – 1980-1981 – 107.025 – M116.960 – pay attention to the engine number
• 450 SLC 5.0 – 1978-1980 – 107.026 – M117.960 – pay attention to the engine number

W126 – S-Class

• 380 SE, SEL – 1980-1985 – 126.032, 126.033 – M116.961, M116.963 – Note the engine number for M116.961
• 420 SE, SEL – 1985-1991 – 126.034, 126.035 – M116.965
• 500 SE, SEL – 1979-1985 – 126.036, 126.037 – M117.961, M117.963 – Note the engine number for M117.961
• 500 SE, SEL – 1985-1991 – 126.036, 126.037 – M117.965
• 560 SE, SEL – 1985-1991 – 126.038, 126.039 – M117.968

C126 – SEC Coupé

• 380 SEC – 1981-1985 – 126,043 – M116,963
• 420 SEC – 1985-1991 – 126,046 – M116,965
• 500 SEC – 1980-1985 – 126,044 – M117,963
• 500 SEC – 1985-1991 – 126,044 – M117,965
• 560 SEC – 1985-1991 – 126,045 – M117,968

W463 – G-Class

• 500 GE – 1993-1994 – 463,228 – M117,965

Suitable from engine number

Specific engine number limits apply to the engine versions listed below. These are derived from the Mercedes data for the previous gasket version.

M116.960
• From engine number 009373

M116.961
• From engine number 015686

M117960
• From engine number 003777
• In addition, the exempted engine number ranges 003337 to 003367 and 003504 to 003710 – check application separately.

M117.961
• From engine number 012996
• In addition, the exempted engine number ranges 010458 to 010654 and 011634 to 012636 – check application separately.

Important: Always check the full engine number before ordering. The excluded engine number ranges of the older gasket are not automatically confirmed for use with this later gasket. Check these against the Mercedes parts catalogue.

Specifications

1. Brand: Elring
2. Mercedes OEM number: 1171412380 – A1171412380
3. Part: right intake manifold gasket
4. Mounting position: right side of the engine – cylinders 1-4
5. Engines: M116 and M117 V8 petrol engines
6. Engine versions: 3.8, 4.2, 5.0 and 5.6 liters
7. Application: depending on engine version and engine number

Additional information

1. For the engine versions M116.960, M116.961, M117.960 and M117.961 Specific engine number limits apply. Check these before ordering.
2. When replacing, also check the gasket of the left cylinder bank and the other seals, vacuum hoses, and connections for aging and damage.
3. Remove old gasket residue and carefully clean the sealing surfaces. Check them for damage and deformation.
4. Install the gasket in accordance with the Mercedes installation instructions and prescribed torque values.
5. After assembly, check for air leaks and smooth motor operation. For motors with K-Jetronic or KE-Jetronic False air can affect engine tuning.
6. The official Mercedes workshop manual and factory specifications always prevail.

Always check before purchase and installation whether the part is suitable and equivalent based on photos, description, and specifications; installed or used parts cannot be returned.